[HATS] ATV Repeater for sale

[Brian C. Miles]

Hello all,

 I still have a fully functional complete ATN (Amateur Television =
Network)
style ATV repeater for sale. It comes with all the necessary link
equipment to link to another ATV repeater, was used to link Usery MTN in
Mesa, AZ to White Tank MTN in West Phoenix.

 The inputs are 2441.5 MHz FMTV  and  434 MHz AMTV. The output is
1277.25 but can be changed easily to another ATV freq. using an Agile
Cable Modulator. The 2 gig receiver is a Wavecom using one of my freq
chips to keep it on 2441.5 MHz. The 434 receiver is from PC Electronics.
The 2 M receiver is a Alinco DR-570T/E Dual band rig , transmit is bad
but not needed.

Tower Preamps:
  434
  2 G - Gaasfet Down East Microwave 13LNAH

Filters:
  1277 MHz 6 MHz wide 6 pole
  1250 - 1300 MHz 3 pole
  2441.5 MHz
  434 MHz 6 MHz wide
  146.43 can
  1253.25 MHz

Modulator:
  ISS GL2610XT  - Agile

Power Supplies:
 2 - SEC 1223 20 Amp switcher

Amplifiers:
  1200 MHz 65 W 4 brick Down East Microwave driven by a single brick amp
  Single brick amp driven by 10 mw to 1W brick
  10 mw to 1W brick

Hardline:
  Enough to run to antennas on a 150 ft tower
  7/8" for 1200
  7/8" for 434
  7/8" for 2 M
  1/2" 75 Ohm for 2 gig
  1/2" jumpers to run in building 20 feet each

Antennas:
  GP-21 1260 - 1300 MHz 1/2 wave 14.9 dbi
  GP-24 2400 - 2450 MHz 1/2 wave 15.4 dbi
  Dual band 2/70 used for 146.43 receive

Controller:
  Intuitive circuits ATV-4 4 input DTMF controlled

ID Screen Generator:
  Amiga 500 Computer
  Amiga 520 RGB to Video adapter modified to put out 1VPP

Professional Monitor:
  Panasonic BT-S1300N

Cabinet:
  6 Ft Rack with Bud B54 Blower

Link Equipment:
  Wavecom transmitter fitted with a 1W amp 2417.5 MHz
  PC Electronics XTAL controlled downconverter 1200 MHz
  1253.25 MHz filter
    all above in a weather proof CABLE TV line box set up to mount to a
pole
  8 FT Scientific Atlantic Grid dish with assoc hardware
  3 runs 100 ft of RG-6
  1 run 100 ft long 12 GA 2 conductor for power
  Agile Cable Demodulator set to down converter output - CATEL


Special features:
  Intuitive circuits OSD-SSM Signal strength overlay on 2 gig input
controllable on 2 Meters

I may be forgetting some things about it. If interested call me at
602-996-9253 or email.

I took it down because site rent was just too expensive.

Detailed pictures of the repeater can be found at
www.atnserver.org/602-996-9253.zip   2MB (Same pictures used to be18 MB)


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---