[HQRP] Fwd: KITS: The AAPB, SMT KIT II

[Ed Manuel]

Next "melt-solder" special.

Ed


>Delivered-To: directvinternet.com%edmanuel@directvinternet.com
>X-Received: 17 Jul 2002 16:14:08 GMT
>Date:   Wed, 17 Jul 2002 12:20:17 -0400
>Reply-To: kd1jv@moose.ncia.net
>Sender: owner-qrp-l@Lehigh.EDU
>From: Steven Weber <kd1jv@moose.ncia.net>
>To: "Low Power Amateur Radio Discussion" <qrp-l@Lehigh.EDU>
>Subject: KITS: The AAPB, SMT KIT II
>X-To:   qrp-l@lehigh.edu
>X-Sender: kd1jv@mailhost.ncia.net
>X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32)
>
>Hi Gang,
>
>It's a go, get your tweezers and magnifying glasses ready!
>
>Got the boards on order and my board guy says he's not too busy, so might
>not take too long to get them. These will be silk screened and solder
>masked boards. Should be able to start shipping them in about 3 weeks. So,
>if you'd like one - or two, go ahead and send me $20.00 per kit plus $1.50
>shipping (US or Canada, DX $5.00) to me at
>
>Steven Weber
>633 Champlain St
>Berlin, NH 03570
>
>In case you missed the discription the other day, here's what it is:
>
>AAPB- Analog Audio Processor Board:
>Combines an Automatic Volume limiting (AVC) circuit with two 700 Hz band
>pass filters (Q of 5) and a low impedance headphone or small 8 ohm speaker
>driver/ampifier. Pervisons for adding a switch to select one, both or no
>filters and a volume control, if desired. This is a prefict companion board
>for SWL's new Rock Mite or other "minimualist" receivers. Built with SMT
>components (1206 size) on a 1.7" x 1.8" single sided board.
>
>The circuit and discription can be seen at http://www.qsl.net/kd1jv/appb.HTM
>
>Thanks!
>
>72,
>Steve, KD1JV
>"Melt Solder"
>White Mountains of New Hampshire
>http://www.qsl.net/kd1jv/


---
Send e-mail to 'listar@stevens.com' with subject:

  'unsubscribe hqrp'  to unsubscribe from this list
  'subscribe hqrp'    to subscribe from this list
  'help'              for more information

Send e-mail to 'dave@stevens.com' to contact a list administrator